Variegate, Inc. Since 1992 - BLOW Press 

Blanking, Drawing and Stamping Presses, Automation, Servo Feeds,

Press Controls, Brakes, Clutches, etc. & Parts Washing Systems

BLOW Press:

The history of the BLOW Press began at a time when the foundation of industrialization was being laid in Canada. It was then that Fredrick Sheldon Blow founded Acton Machine Shop in 1920. The shop in Acton Ontario, Canada grew into what was, for that time, a modern factory. Fredrick Sheldon Blow is seen as a pioneer of press manufacturing. Even Today, going into the fourth generation, the company is still family owned and operated.




BLOW Press specializes in custom and adaptable press designs throughout its entire product line. State-of-the-Art Controls, Servo Transfers and Quick Die Change Equipment are a few of the features that make BLOW Press among the best in the industry.

Straight Side Mechanical up to 3000 Tons:

Crank Shaft Presses (150 ton 1000 ton)

Eccentric Shaft Presses

Eccentric Gear Presses (200 to 3000 ton)

Transfer Presses and Tandem Press Lines

Custom and Standard Designs

                 

Blow Standard Press Designs - Call and see if one is in production!

Tonnage	200	300	400	500	600	800
Model	SC2-200-72-42	SC2-300-84-42	SC2-400-108-54	SC2-500-120-54	SC2-600-144-60	SC2-800-144-60
Bolster R-L x F-B	72 x 42	84 x 42	108 x 54	120 x 54	144 x 60	144 x 60
Stroke	8"	10"	10"	12"	14"	18"
Shut Height	24"	24"	28"	30"	32"	48"
Slide Adjust	8"	10"	12"	10"	10"	12"
Speed SPM	40-80	30-60	20-60	20-50	20-40	20-40
Motor HP	30	50	60	75	100	125
Drive	Twin end S.B.G.	Twin end S.B.G.	Twin end S.B.G.	Twin end S.B.G.	Twin end S.B.G.	Twin end S.B.G.
Rating 1/2" up at SPM	40	30	20	20	20	20
Window Width	24"	26"	38"	38"	54"	54"
Hyd. Overload	No	No	No	No	Yes	Optional

STANDARD EQUIPMENT:

• Base price includes free standing console, one operator T-stand with plug in at side of console

• Three year warranty on all major frame components

• Allen Bradley AC variable frequency drive

• Hydraulic tie rods with pump

• Floor and pit mounted designs

• T-slotted slide and bolster on 6 inch centers

• Trabon circulating filtered lube with broken line detection

• Feed pad on right hand side of press

• Ortlinghaus air friction combination clutch/brake

• Flexibility on shut height and press control

• All Blow presses include a factory trained technician to be on site for each and every startup to ensure the press is functioning as designed and that the operators have been properly trained in press utilization and safety

                  

Go to ... BLOW Press Web Site

                    

Go to ... Benchmaster "C" Frame

Variegate, Inc.'s Main Menu