FlexSpray's®
modular pumps allow you to use a simple five gallon pail for a
reservoir or design a system to feed multiple presses from one reservoir.
Capacity -
FlexSpray®
Modular:
- Variable depending on customer's needs - 1.5, 2.5, 5, 10 and 40 gallon stainless steel
tanks or use a five gallon pail
- Choose from two pump volumes and two fluid viscosity ranges
(standard, micro and
high viscosity)
- Two standard or micro pumps per modular assembly or one
high viscosity pump per modular
assembly
Options:
Same as all systems (see FlexSpray Main)
NOTE - Lower section
of menu has
Technical Information
page links)
Go to ... Fluid Delivery Main Page
Go to ... Modular Components -
High Viscosity Pump, Standard Pump
Cut-Away & Solenoid (buy
with or without
remote tank)
Go to ... Systems - One to 12 Pump
(Micro-Flex, Min-Flex, ...)
Go to ... Systems - One to Two Pump
Mod Flex - NEW 2003
Technical Information:
Go to ... Maintenance, Pump
Information, ...
Go to ... Pump Part Identification
Drawing & List
Go to ... Pump Picture - View Details
via Cut-away of Standard & Micro Pump
Go to ... Tip Selection
- See the spray pattern for the various tips
THE “FLEXSPRAY” PISTON-PUMP
BODY GUARANTEE:
The pistons and pump bodies on all “FlexSpray”
pumps are guaranteed against failure due to cylinder bore scoring or material
defects or workmanship, during normal use, for as long as the pump assembly
continues to be in active service under the same application and design
criterion initially intended. Upon submission of a defective piston, pump body
or both, “FlexSpray” or one of its distributors will provide a replacement
piston and/or pump body of the same size and specification, with out cost to the
end user.
Voice: (256) 830-6679
Variegate, Inc.
Since
1992 - 111 Grayfox Trail Huntsville, AL 35806
Copyright Variegate, Inc. 2000-2017
Variegate,
Inc.'s Main Menu