

Standard Features -
FlexSpray®
Micro, Mid, Min, and Max-Flex Systems:
-
- Stainless Steel Tank
-
- Pump (one to 12) on Manifold
-
- Fluid Filtration (each pump has filter)
- Three Position Selector Switch in Stainless Steel Cabinet
- Power On Indicator Light
- Ross Solenoid Valve
- Filter, Regulator, Lubricator Assembly
- Additional - Spray Nozzle Assembly (nozzle,
check valve, tubing, quick connect, etc.) -
Must purchase a configuration separately to match your
individual requirements
Capacity:
-
- Variable depending on customer's needs - 1.5, 2.5, 5, 10 and 40 gallon stainless steel
tanks
-
- Choose from two pump volumes and two fluid viscosity ranges
(standard, micro and
high viscosity)
-
- One to twelve pumps actuated of one press signal
NOTE - Custom tanks are available
Configurations:
-
- Micro-Flex (2.5 gallon, 1-6 pumps) - Compact system for portability between presses
-
- Min-Flex (5 gallon, 1-6 pumps) - Small profile that ensures system availability by directly mounting to press
-
- Mid-Flex (10 gallon, 1-12 pumps) - Mid range system for single and multi-point application
-
- Max-Flex (40 gallon 1-12 pumps) - High range system for single and multi-point application where greater
amounts of lubricant are required
Options:
-
- Same as all systems (see FlexSpray Main)
NOTE - Lower section
of menu has
Technical Information
page links)
Go to ... Fluid Delivery Main Page
Go to ... Modular Components -
High Viscosity Pump, Standard Pump
Cut-Away & Solenoid (buy
with or without
remote tank)
Go to ... Systems - One to 12 Pump
(Micro-Flex, Min-Flex, ...)
Go to ... Systems - One to Two Pump
Mod Flex - NEW 2003
Technical Information:
Go to ... Maintenance, Pump
Information, ...
Go to ... Pump Part Identification
Drawing & List
Go to ... Pump Picture - View Details
via Cut-away of Standard & Micro Pump
Go to ... Tip Selection
- See the spray pattern for the various tips
THE “FLEXSPRAY” PISTON-PUMP
BODY GUARANTEE:
The pistons and pump bodies on all “FlexSpray”
pumps are guaranteed against failure due to cylinder bore scoring or material
defects or workmanship, during normal use, for as long as the pump assembly
continues to be in active service under the same application and design
criterion initially intended. Upon submission of a defective piston, pump body
or both, “FlexSpray” or one of its distributors will provide a replacement
piston and/or pump body of the same size and specification, with out cost to the
end user.
Voice: (256) 830-6679
Variegate, Inc.
Since
1992 - 111 Grayfox Trail Huntsville, AL 35806
Copyright Variegate, Inc. 2000-2017
Variegate,
Inc.'s Main Menu